Encrypting Secret Data at Rest

This page shows how to enable and configure encryption of secret data at rest.

Before you begin
Configuration and determining whether encryption at rest is already enabled
Understanding the encryption at rest configuration.
Encrypting your data
Verifying that data is encrypted
Ensure all secrets are encrypted
Rotating a decryption key
Decrypting all data

Before you begin

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. If you do not already have a cluster, you can create one by using Minikube, or you can use one of these Kubernetes playgrounds:

To check the version, enter kubectl version.

Kubernetes version 1.13.0 or later is required
etcd v3 or later is required

Configuration and determining whether encryption at rest is already enabled

The kube-apiserver process accepts an argument --encryption-provider-config that controls how API data is encrypted in etcd. An example configuration is provided below.

Note: The alpha version of the encryption feature prior to 1.13 used the --experimental-encryption-provider-config flag.

Understanding the encryption at rest configuration.

apiVersion: apiserver.config.k8s.io/v1
kind: EncryptionConfiguration
resources:
  - resources:
    - secrets
    providers:
    - identity: {}
    - aesgcm:
        keys:
        - name: key1
          secret: c2VjcmV0IGlzIHNlY3VyZQ==
        - name: key2
          secret: dGhpcyBpcyBwYXNzd29yZA==
    - aescbc:
        keys:
        - name: key1
          secret: c2VjcmV0IGlzIHNlY3VyZQ==
        - name: key2
          secret: dGhpcyBpcyBwYXNzd29yZA==
    - secretbox:
        keys:
        - name: key1
          secret: YWJjZGVmZ2hpamtsbW5vcHFyc3R1dnd4eXoxMjM0NTY=

Each resources array item is a separate config and contains a complete configuration. The resources.resources field is an array of Kubernetes resource names (resource or resource.group) that should be encrypted. The providers array is an ordered list of the possible encryption providers. Only one provider type may be specified per entry (identity or aescbc may be provided, but not both in the same item).

The first provider in the list is used to encrypt resources going into storage. When reading resources from storage each provider that matches the stored data attempts to decrypt the data in order. If no provider can read the stored data due to a mismatch in format or secret key, an error is returned which prevents clients from accessing that resource.

Note: The alpha version of the encryption feature prior to 1.13 required to be configured with kind: EncryptionConfig and apiVersion: v1.

Caution: IMPORTANT: If any resource is not readable via the encryption config (because keys were changed), the only recourse is to delete that key from the underlying etcd directly. Calls that attempt to read that resource will fail until it is deleted or a valid decryption key is provided.

Providers:

Name	Encryption	Strength	Speed	Key Length	Other Considerations
`identity`	None	N/A	N/A	N/A	Resources written as-is without encryption. When set as the first provider, the resource will be decrypted as new values are written.
`aescbc`	AES-CBC with PKCS#7 padding	Strongest	Fast	32-byte	The recommended choice for encryption at rest but may be slightly slower than `secretbox`.
`secretbox`	XSalsa20 and Poly1305	Strong	Faster	32-byte	A newer standard and may not be considered acceptable in environments that require high levels of review.
`aesgcm`	AES-GCM with random nonce	Must be rotated every 200k writes	Fastest	16, 24, or 32-byte	Is not recommended for use except when an automated key rotation scheme is implemented.
`kms`	Uses envelope encryption scheme: Data is encrypted by data encryption keys (DEKs) using AES-CBC with PKCS#7 padding, DEKs are encrypted by key encryption keys (KEKs) according to configuration in Key Management Service (KMS)	Strongest	Fast	32-bytes	The recommended choice for using a third party tool for key management. Simplifies key rotation, with a new DEK generated for each encryption, and KEK rotation controlled by the user. Configure the KMS provider

Each provider supports multiple keys - the keys are tried in order for decryption, and if the provider is the first provider, the first key is used for encryption.

Storing the raw encryption key in the EncryptionConfig only moderately improves your security posture, compared to no encryption. Please use kms provider for additional security. By default, the identity provider is used to protect secrets in etcd, which provides no encryption. EncryptionConfiguration was introduced to encrypt secrets locally, with a locally managed key. Encrypting secrets with a locally managed key protects against an etcd compromise, but it fails to protect against a host compromise. Since the encryption keys are stored on the host in the EncryptionConfig YAML file, a skilled attacker can access that file and extract the encryption keys. This was a stepping stone in development to the kms provider, introduced in 1.10, and beta since 1.12. Envelope encryption creates dependence on a separate key, not stored in Kubernetes. In this case, an attacker would need to compromise etcd, the kubeapi-server, and the third-party KMS provider to retrieve the plaintext values, providing a higher level of security than locally-stored encryption keys.

Encrypting your data

Create a new encryption config file:

apiVersion: apiserver.config.k8s.io/v1
kind: EncryptionConfiguration
resources:
  - resources:
    - secrets
    providers:
    - aescbc:
        keys:
        - name: key1
          secret: <BASE 64 ENCODED SECRET>
    - identity: {}

To create a new secret perform the following steps:

Generate a 32 byte random key and base64 encode it. If you’re on Linux or macOS, run the following command:
```
head -c 32 /dev/urandom | base64
```
Place that value in the secret field.
Set the --encryption-provider-config flag on the kube-apiserver to point to the location of the config file.
Restart your API server.

Caution: Your config file contains keys that can decrypt content in etcd, so you must properly restrict permissions on your masters so only the user who runs the kube-apiserver can read it.

Verifying that data is encrypted

Data is encrypted when written to etcd. After restarting your kube-apiserver, any newly created or updated secret should be encrypted when stored. To check, you can use the etcdctl command line program to retrieve the contents of your secret.

Create a new secret called secret1 in the default namespace:

kubectl create secret generic secret1 -n default --from-literal=mykey=mydata

Using the etcdctl commandline, read that secret out of etcd:
```
   ETCDCTL_API=3 etcdctl get /registry/secrets/default/secret1 [...] | hexdump -C
```
where [...] must be the additional arguments for connecting to the etcd server.
Verify the stored secret is prefixed with k8s:enc:aescbc:v1: which indicates the aescbc provider has encrypted the resulting data.
Verify the secret is correctly decrypted when retrieved via the API:
```
kubectl describe secret secret1 -n default
```
should match mykey: bXlkYXRh, mydata is encoded, check decoding a secret to completely decode the secret.

Ensure all secrets are encrypted

Since secrets are encrypted on write, performing an update on a secret will encrypt that content.

kubectl get secrets --all-namespaces -o json | kubectl replace -f -

The command above reads all secrets and then updates them to apply server side encryption. If an error occurs due to a conflicting write, retry the command. For larger clusters, you may wish to subdivide the secrets by namespace or script an update.

Rotating a decryption key

Changing the secret without incurring downtime requires a multi step operation, especially in the presence of a highly available deployment where multiple kube-apiserver processes are running.

Generate a new key and add it as the second key entry for the current provider on all servers
Restart all kube-apiserver processes to ensure each server can decrypt using the new key
Make the new key the first entry in the keys array so that it is used for encryption in the config
Restart all kube-apiserver processes to ensure each server now encrypts using the new key
Run kubectl get secrets --all-namespaces -o json | kubectl replace -f - to encrypt all existing secrets with the new key
Remove the old decryption key from the config after you back up etcd with the new key in use and update all secrets

With a single kube-apiserver, step 2 may be skipped.

Decrypting all data

To disable encryption at rest place the identity provider as the first entry in the config:

apiVersion: apiserver.config.k8s.io/v1
kind: EncryptionConfiguration
resources:
  - resources:
    - secrets
    providers:
    - identity: {}
    - aescbc:
        keys:
        - name: key1
          secret: <BASE 64 ENCODED SECRET>

and restart all kube-apiserver processes. Then run the command kubectl get secrets --all-namespaces -o json | kubectl replace -f - to force all secrets to be decrypted.

Feedback

Was this page helpful?

Thanks for the feedback. If you have a specific, answerable question about how to use Kubernetes, ask it on Stack Overflow. Open an issue in the GitHub repo if you want to report a problem or suggest an improvement.

Tasks

Kubernetes v1.16 documentation is no longer actively maintained. The version you are currently viewing is a static snapshot. For up-to-date documentation, see the latest version.